|
Fiberglass
Sleeving |
|
FSG FLEXIBLE & SELF-EXTINGUISHABLE
SILICONE SLEEVE |
|
|
 |
|
DESCRIPTION: |
|
The
flexible and
self-extinguishable
silicone
glassfiber
sleeving FSG
series made
by our
company is
braided with
nonalkali
fiberglass,
it is
treated at a
high
temperature
and coated
with a
special kind
of silicone
resin. |
|
|
|
|
This
flexible and self-extinguishable
silicone glassfiber sleeving possesses
good qualities of dielectric,
self-extinguishment, excellent softness.
It is widely used as wiring insulator
for H grade electrical mechinery,
domestic electrical appliances, heating
electric equipments and electronic
apparatus, and also for the protection
of collected strands of wire.
Colour: Natural, we also make sleeves
of different colours needed by the
users. Sleeve FSG series possesses good
flexibility and self-extinguishment. |
|
|
|
Type |
Name |
Dielectric |
Endurance to |
Resistance to |
Volume |
|
grades |
temperature |
burning |
resistivity |
|
|
|
FSG-1 |
Flexible
self-extinguishable
silicone glassfiber
sleeve |
C2 |
200℃(-30℃) |
UL1441 |
10″Ωcm |
|
FSG-2 |
Flexible
self-extinguishable
silicone glassfiber
sleeve |
C1 |
200℃(-30℃) |
UL1441 |
10″Ωcm |
|
FSG-3 |
Flexible
self-extinguishable
silicone glassfiber
sleeve |
B |
200℃(-30℃) |
UL1441 |
10″Ωcm |
|
FSG-3A |
Flexible
self-extinguishable
silicone glassfiber
sleeve |
A |
200℃(-30℃) |
UL1441 |
10″Ωcm |
|
|
|
|
|
Inside |
Diametre |
Wall |
Thickness |
|
Nominal
|
Tolerancl
|
Grade A min
|
Grade B.C1.C2.
min
|
|
0.5-2.5
|
+0.25-0.00
|
0.38
|
0.18
|
|
3-4
|
+0.50-0.00
|
0.46
|
0.23
|
|
5-6
|
+0.50-0.00
|
0.50
|
0.28
|
|
7-9
|
+0.60-0.00
|
0.50
|
0.28
|
|
10-12
|
+0.80-0.00
|
0.64
|
0.40
|
|
14-18
|
+0.80-0.00
|
0.68
|
0.48
|
|
20-30
|
+1.00-0.00
|
0.70
|
0.50
|
|
|
|
|
|
Grade |
Lowest Central Value |
Lowest Individual
Value |
|
A
|
7000
|
5000
|
|
B
|
4000
|
2500
|
|
C1
|
2500
|
1500
|
|
C2
|
1500
|
800
|
|
|
|
ACRYLIC COATED FIBERGLASS SLEEVE |
|
Acrylic coated
fiberglass sleeve is
made of E-biberglass
braided lseeve are
baking coated with
Acrylic-modified
Resin. These sleeve
offer reliable
dielectric, heat
resestance is good,
and escellent
compatibility with
polyester, eposy.
Bright- coloured dye
ability on sleeving.
This is rated for
class-F(155℃). It
can be used for
motors, electrical
appliances,
electrcal
instruments,
wireless sets
collected stands of
wire as well as
their protection. |
|
|
|
|
|
Appearance: |
|
These sleeves' surface is
smooth, and bright multicolour. |
|
Dimension: |
|
The standard length is
1000±20mm(Continuous length may
be negotiated) |
|
Note: |
|
The size over 16mm or special
requirement may be negotiated. |
|
|
Inside Diameter and Wall
Thickness (Table 1)(mm) |
|
|
Inside |
Diametre |
Wall |
Thickness |
|
Size |
Tolerance |
Minimum |
Maximun |
|
1-3 |
±0.20 |
0.20 |
0.60 |
|
4-9 |
±0.30 |
0.30 |
0.70 |
|
10-16 |
±0.50 |
0.50 |
0.80 |
|
|
|
Performance Index (Table
2) |
|
|
Performance |
Index |
|
Breakdown Voltage(even) |
Ⅱ |
4000 |
|
Ⅲ |
2500 |
|
Ⅳ |
1000 |
|
Bending at low
temperature |
No cracking or
detachment of the
coating shell be visible
after 60 min at -15℃
|
|
Bending after heat
treatment |
No cracking or
detachmant of the
coating shell be visible
after 48±1hr at 155℃±3℃
|
|
The other performances
|
Reference to
GB7113-7117-86 |
|
|
|
POLYURETHANE RESIN COATED FIBERGLASS
SLEEVE |
|
|
|
|
Polyrethane
fiberglass is made
of E-fiberglass
braided sleeves are
baking coated with
polyurethane resin.
The coating has high
adhesion to the
glass braid,
retention of
dielectric strength
is good after aging
and physical abuse,
dielectric under
thermal and electric
stress, excellent
flexibility and
push-back. It offers
excellent resistance
to oil, good
resistance to acid,
alkalies and organic
solvents. These
sleeves are suitable
for class-F(155℃)
electric motor,
electrical apparatus
and domestic
electrical appliance
as well as their
protecting device or
collected strands of
wire. |
|
|
|
Appearance: |
|
These sleeves' surfaces are
smooth, clear and neat, natural
white colour. |
|
Dimension: |
|
The standard length is
1000±20mm(Continuous length may
be negotiated). |
|
Note: |
|
The size over 16mm or special
requirement may be negotiated. |
|
|
Inside Diameter and Wall Thickness
(Table 1)(mm) |
|
Inside |
Diametre |
Wall |
Thickness |
|
Size |
Tolerance |
Minimum |
Maximun |
|
1-3 |
±0.20 |
0.20 |
0.60 |
|
4-9 |
±0.30 |
0.30 |
0.70 |
|
10-16 |
±0.50 |
0.50 |
0.80 |
|
|
Performance Index (Table 2) |
|
Performance |
Index |
|
Breakdown Voltage(even) |
Ⅱ |
4000 |
|
Ⅲ |
2500 |
|
Ⅳ |
1000 |
|
Bending at low temperature |
No cracking or detachment of the
coating shell be visible after
60 min at -15℃ |
|
Bending after heat treatment |
No cracking or detachmant of the
coating shell be visible after
48±1hr at 155℃±3℃ |
|
The other performances
|
Reference to GB7113-7117-86 |
|
